When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
This isan antique Seth Thomas clock dial with bezel. This dial has been replaced witha historically correct dial. The glassis flat. Mounting tabs on rear. The following measurements were taken“Center to Center”
Distancebetween 2 winding holes is 3 1/8".
Distancebetween winding hole and center is 2".
Distancebetween center and fast/slow adjustment is 3/4".
Fitshole 5”.
The overall diameter is 511/16".
Please ask any questions before offerding. Shipping to U.S. only. Thanks!And please see my other sales.
Click here to see my: Store
PleaseNote; These dials are close to a century old if not older. Many have been altered or damaged over theyears. I make repairs as needed. I use theoriginal glass if possible and replace with correct flat or convex glass as wasoriginally used in that particular dial.Some of my dials have small dents or flaws from when they were made orhave been damaged at some time over the years. Some glass may have scratches orchips. Some brass may be discolored. Please look closely at photos.
Outerdiameter is the measurement of the dial plate that mates with the clock and notthe diameter of the outer glass bezel.The overall outer glass bezel may be slightly larger on some dials.
Measurementsare given center of hole to center of hole(“center to center”).
Iwant you to be happy with your dial. Ifyou have any problems with a purchased dial, let me know. I will be happy to take it back and help youfind the correct dial needed. Some ofthese dials are interchangeable and many are not. If you are unsure, send me a photo of your clock and/or old dialand I will try to help you find the correct dial.
ST3TabFlat 4